[A6] Pitch before note triggering

[Jeff Platt]

Colin wrote:
> One thing that always bugged me about the A6 is the fact 
> that when you hit a note the VCO pitch slides up from 
> somewhere to the note you press.

Leo wrote:
> about the vco pitch : i found that not only you need to set the osc 
> pitch to fast ( under processor), but also switch off the background 
> tuning.  then the  oscillator tuning/tracking seems to be good...

FYI, the pitch of each voice stays where it was last played.
If you play a low note on one voice, then play a high note on 
the same voice, the oscillator will need to slew up to the new 
note before it plays. Turning background tuning off helps 
because that is constantly changing every oscillator's pitch and 
you won't know where it ends up. If you are playing in one 
general register, or pitch, the slewing effect will be minimized. 
Believe me, I tried to fix this anomoly, but was limited by the 
slewing time of the oscillators. I thought that setting the fast 
engine setting on the oscillators fixed it, but obviously not all 
the way.

Jeff