[A6] mix mode

[Richard]

thanks guys, I'm on the path now. Reserving the mono voice at least means
that the poly voices will not jump in and use those voices messing up the
mono lines - and the ability to use the 4 aux and main outputs to get 4 poly
voices (or two stereo) as well as few monos is not a bad workaround

Richard


----- Original Message -----
From: "Michael E. Caloroso" <analoguediehard at att.net>
To: <a6 at code404.com>
Sent: Wednesday, January 11, 2006 4:10 PM
Subject: Re: [A6] mix mode


> (If I got nomeclature wrong, I don't have an A6 here - mine went back to
Alesis for repair)
>
> For mono patches, you want to route audio through voice outputs, not main
outputs - press VIEW on the far right to set this up.
>
> When you assign that mono patch to a mix, select that patch and press the
mono button.  There should be a parameter to select voice number.  If this
is set up right, voice #n will be routed to voice output #n.  This is stored
per mix, I've done this.
>
> MC
>
> > > are you reserving the voices with the mono sounds?
> > > If you do this then only those sounds will come out each of their
voice
> > outs
> > >
> > > then the polys will only come out out of the main or aux, plus their
voice
> > > outs as well
> > > but not the ones reserved for the monos if you hard set
> >
> > thanks but i can't find how to "reserve voices" either in the manual or
tips
> > and tricks guide Colin - any clues?
> _______________________________________________
> A6 mailing list
> A6 at code404.com
> http://mailman.code404.com/mailman/listinfo/a6
>
>