[A6] Just recieved my new andromeda, appears to be a lemon

Shawn O. sobrien at wavecable.com
Fri Feb 4 01:32:18 PST 2005


yeah, was reading the tips and tricks website and tried that before I 
got the below message and figured it out,.. I wrote over the effected 
patch and all is fine and dandy now, voices stay in tune without temp or 
background tuning on after a good 15 minute warm up and room temp around 
85f, tomorrow ill have to take it upstairs and hook it up in the studio 
to give it the midi test =c)

Thanks all who replied with helpfull info's

~Shawn O

Michael E. Caloroso wrote:

>Sounds like the common "corrupt patch" problem.  The A6 retrieves the last accessed patch when powered up; if one is downloaded and is corrupted, this will happen.
>
>Try holding down soft button (SB) #1 while turning the power on.  This forces the A6 to load the default patch, not the last accessed one.
>
>If this works, you're OK until you surf the presets and stumble onto the corrupt one, which will hang the machine again.  Pay attention to which bank the corrupt patch is in - if it is in the user bank, then you'll have to power up while holding down SB#3. This completely resets the user RAM, you'll lose all the user patches and mixes.
>
>If the corrupt patch is in the preset bank, they are in flash memory and the entire bank has to be reloaded.  Power up with SB#1 and reload the preset banks, SB #3 will not reset them.
>
>All the power-up buttons are on page 269 (Appendix C Troubleshooting) of the user manual.
>
>MC
>_______________________________________________
>A6 mailing list
>A6 at code404.com
>http://mailman.code404.com/mailman/listinfo/a6
>
>  
>



More information about the a6 mailing list