[A6] Adjusting Pitch Bend Wheel

[David Evans]

On Tue, Jun 08, 2004 at 12:45:33PM -0600, Scott Juskiw wrote:
> I'm trying to figure out how to pop out the left end 
> panel that houses the two wheels. I've removed the 4 screws from 
> underneath but the panel is still attached along the left edge. Any 
> ideas?

  I think that trying to do this will result in pain.  I'd remove the
entire top of the A6 and get at things that way.  I think that there's
a post from me in the archives about how to do this.

-- 
David Evans                                         dfevans at bbcr.uwaterloo.ca
Ph.D. Candidate, Computer/Synth Junkie     http://bbcr.uwaterloo.ca/~dfevans/
University of Waterloo         "Default is the value selected by the composer
Ontario, Canada           overridden by your command." - Roland TR-707 Manual