[A6] Re: NRPN with Sonar, controlling the A6

[Larry Pham]

Thanks Proto! That makes a little more sense. I couldn't figure out how a
single NRPN envelope was going to control a function which requires 2
control numbers. I will give it a try when I get home....




----- Original Message -----
From: "Proto" <protokol13 at hotmail.com>
To: <a6 at code404.com>
Sent: Friday, October 31, 2003 8:21 AM
Subject: [A6] Re: NRPN with Sonar, controlling the A6


> I did some NRPN editing last night with Sonar on the A6.  It's pretty
simple
> to use, and shouldn't be an issue if you know the steps.  The website link
I
> posted could've helped, but if you are still unsure, I'll list a little of
> what I did.
>
> I made sure that my settings in GLOBAL->PANEL were set to send out midi
> data.  I was sending out midi data at DENSE to have a smoother sweep
> recording.  I then hit record and recorded the knob movement, and then
went
> to the event viewer to observe the parameter number that Cutoff filter 1
was
> sending out.  I noted that number, went into piano roll, selected NRPN and
> typed in that parameter number.  If you cannot view the NRPN data, just
> select to ALL CHANNELS on the last box.  I recommend expanding the view a
> little, because the data only used 4096 steps.  You can simply edit the
> information like a normal control change at this point.
>
> You can probably change the settings to display the MSB and LSB
> individually, but sonar defaults to putting them together to provide a
> 14-bit number.
>
> Control #98 = 16 [MSB]
> Control #99 = 5   [LSB]
>
> Sonar NRPN # = (16x128)+5 = 2053
>
> -proto-
> _______________________________________________
> A6 mailing list
> A6 at code404.com
> http://code404.com/mailman/listinfo/a6
>