[A6] breath controllers

[Richard]

I'm plugging the wx5 direct but the problem is not midi mapping so much as
programming the A^ to get best out of the breath input. I suppose part of
whAT I'm lacking is knowledge of modelling technique

Richard

----- Original Message -----
From: "Cyril Blanc" <blanc.cyril at wanadoo.fr>
To: "Richard" <richard at chorlton.com>
Sent: Friday, August 22, 2003 4:56 AM
Subject: Re: [A6] breath controllers


> On 21/08/03 14:56, "Richard" <richard at chorlton.com> wrote:
>
> > Hi all
> >
> > Somewhat out of my depth
> >
> > I am trying to write some breath controlled patches for the A6 to
trigger from
> > a yamaha wx5. The yammy outputs on CC2 which I have routed to CCA on the
A6. I
> > am then trying to route CCA to stuff like VCA  envelope level, filetre
> > frequency. So far so good  - the Wx5 will control the A6 but  I am not
getting
> > the control of dynamics and volume I would expect. Are there some golden
> > principles about breath controller patches on the A6 or other synths I
should
> > know.
> >
> > Or a source for this info on the web??
> >
> > Or existant examples of breath patches I could study.
> >
> > any help would be most welcome in this moment!
> >
> >
> > Richard
> > _______________________________________________
> > A6 mailing list
> > A6 at code404.com
> > http://code404.com/mailman/listinfo/a6
> Do you direct plug your Wx5 to the A6 or do you go thru a computer ?
> If you go thru a computer and a software like Logic, it is easy to
transform
> a message to another
>
>
> Best regards
>
> Cyril Blanc
> France
>
> If you want to be sure I read your answer leave my name in it !
> Spam mails are directly going to trash
>