[A6] Hanging A6

[Larry Pham]

Hey guys. I have just ran into a serious problem. After reading an earlier
message about holding down soft button 1 during boot up for the diagnostic
test, I've never tried this so i did it. First off, all that did was loaded
up a default mix in slot 00. Nothing cool about that. After I did that I
went to work on the project I was on so i had to dial up the (multi) or mix
(in my case it was mix 12) After selecting mix 12 my A6 hangs. Nothing
responds so I had to restart. ( A first for me) This time, the A6 does not
boot completely. It hangs on the initial boot up screen. I tried restarting
again and again and it would keep hanging. I finally tried holding soft
button 1 down again during boot up and it started up. Very strange. however,
my A6 will hang when i am scanning through my mixes and once agin it won't
start up unless I hold down soft button 1 while strating up. Does any one
have a clue what's going on here?  This is very frustarting as it was
working fine before. Please help!

Larry