[A6] More modulating outputs...

[Arnd Kaiser]

As the name says, the individual outputs are voice outputs, not sound or
channel outputs. In order to use them effectively in a mix you need to do
the following:

- use only monophonic sounds on a voice output (like bass, lead or drum
sounds)
- select a fixed voice for this sound
- enable voice out and disable main out for this sound
- make sure that voice out is disabled for all other sounds used in your mix
(these are mix parameters, so you don't have to make changes to your sounds,
just to the mix)

Your mistake might be that you thought the channel number had anything to do
with the voice outputs. It doesn't. Outputs are fixed to voices, not to
channels.

Hope that explains.

Arnd

> As time has not permitted much noodling, I finally got back to building
some
> mix patches on my new A6 this evening...
>
> I'm still experiencing this wierd "rotating voice out" behavior:
>
> -select a mix
> -insure voice out is enabled on channel X assigned to voice out Y
> -insure A6 sequencer is stopped
> -trigger 1 voice via external sequencer
>
> Output:
> 1st note played comes out on output Y
> 2nd note played comes out on output Y+1
> 3rd note played comes out on output Y+2
> 4th note played comes out on output Y+3
> ...
>
> you get the picture.
>
> Is there somehting I'm missing? [very new to the A6] Or do I get to test
the
> following assertion?
>
> :
> :   Yep.  Alesis A6 support rocks.
> :
>
> Thanks! -E.
> _______________________________________________
> A6 mailing list
> A6 at code404.com
> http://code404.com/mailman/listinfo/a6





REINKLANG
[music€sounddesign]
Arnd Kaiser
Am Wartturm 1c
65191 Wiesbaden

fon +49-611-564 05 30
fax +49-611-564 05 31
mobil +49-171-494 17 56