Hi Chris, thanks very much for the help, i'm a little confused by your last comment though. Are you saying that in my given situation, i wouldn't need a conversion utility in my MIDI chain? because a funny detail i didn't mention was that when i turn a knob, say filter 1, the monitor mode on my Kawai picks up the MIDI channel for the duration of the turn (much like i see it flash twice for note on and off) but when i record the filter sweep, i don't hear it on playback, only the note. this indicates to me that it can recognize the a6 is sending the data but either can't record it or can't transmit it back. I concluded i could use a MIDI utility to solve the problem, this way i still wouldn't need my computer for gigs since the CC data would be right there in the sequencer memory. If you could send the me link to the screenshot it'd be much appreciated but i'll check the archives in the meantime and see what i can come up with. Ah the quirks of being a hardware traditionalist ;) Is anyone else using a standalone hardware sequencer for their a6 besides me? Out of curiousity Cheers Kieran \From: Chris Pickett Subject: Re: [A6] converting NRPN's to CC with MidiOX To: A6 List Message-ID: <3FF687F3.20707@mail.mcgill.ca> Content-Type: text/plain; charset=ISO-8859-1; format=flowed But then again ... if all you want to do is make MIDI recordings of your A6 and play them back, the NRPN data is sent as two CC's, so you should have no problems there. It's only if you want to use the knobs on your A6 to control other hardware or software via CC's that you need to worry. Chris Pickett wrote: > Hi Kieran, > > I posted about this in the last 2 or 3 weeks. In your case, since you > aren't using a software sequencer, you just need one instance of > MIDIOX, and don't need MIDI Yoke. I posted a link to a screenshot > (still there) showing parameters you need in the midi filter -- you > want to look at the left hand side of the image (that's for NRPN --> > CC), the rhs is for CC --> NRPN. > > If you can't find the post, email me and I'll forward it to you. > > Cheers, > Chris > > K Coulter wrote: > >> Hi all, after a few snags i've got my A6 and Kawai Q-80 sequencer all >> ready to go, then i realized i had another problem. The Kawai unit >> does not respond to NRPN data and so i realized all it was good for >> at the moment was to record note data, which is not enough for me.. >> then i remembered seeing a post on this list about converting NRPN to >> CC data using MIDI OX, which i have and am somewhat familar with. >> I've routed my MIDI interface so that outgoing data from the A6 goes >> through the computer and back out to go into the Kawai In port, all i >> need to do now is figure out how to configure MIDI OX to convert the >> NRPN's to CC data. I would be greatly indebted to anyone who can help >> me figure out how to do this. >> >> Thanks >> >> Kieran >> >> _____________________________________________________________ >> goatrance.net - psychedelic trance and free e-mail service : >> http://goatrance.net >> _______________________________________________ >> A6 mailing list >> A6@code404.com >> http://code404.com/mailman/listinfo/a6 >> >> >> > > _______________________________________________ > A6 mailing list > A6@code404.com > http://code404.com/mailman/listinfo/a6 > ------------------------------ _______________________________________________ A6 mailing list A6@code404.com http://code404.com/mailman/listinfo/a6 End of A6 Digest, Vol 101, Issue 2 ********************************** _____________________________________________________________ goatrance.net - psychedelic trance and free e-mail service : http://goatrance.net