[A6] If MIDI notes are too short, dosen't play them. Also, does your display flicker?

[John-Paul Bedinger]

 .A.S Truhan III vampeiyre at earthlink.net wrote:
>I'm guessing you're sequencing notes that are 
>pseudo arpeggiated? Very
>fast, almost at a fast cymbal-like rate?

yep. oddly though, the rate isnt fast, just the 
'gate'. it is the metronome output of
a k2500rs. I tried plugging the midi out of the 
K2500 into my K5000 instead of the A6,
and I can hear the metronome with no problems on 
my k5000. Cable run is about 15ft.


>	Do you have any MIDI CC's changing any patch 
>parameters?

nope

>If not, in the>mix section, select the program 
>in question. Go to the KBD and CNTL
>sections, and disable the keyboard and all the 
>controller (mod wheel, pitch
>wheel, ribbon controller, aftertouch, pedals, 
>etc.

I'm not even in mix mode, but turning off 
contollers, mods, etc. doesn't help.

Here is another odd thing: If I hold down the 
metronome note(C4) on the A6 in LOCMID
mode(so it can get notes from the keyboard as 
well as midi), I can hear the click just fine.
No pedals attached, or anything. Just the midi 
input and the mix outputs.

Could anyone turn down their contrast knob and 
see if the LCD display flickers any degree,
even if you arent doing anything? The backlight 
itself dosen't dim, just like a subtle 
modulation
of the LCD contrast.