SV: [A6] Does the Left/Right - Ribbon Function?

glenn eriksson anykeystudio at hotmail.com
Fri Jan 14 04:22:19 PST 2005


Yes that make sense, I didn’t know that you could set different C.C. for 
left and right side of the ribbon control. I am very thankful for your help 
and tip. I will check it later to day.

Greeting Glenn.


>From: Boele Gerkes <scd at synthmusic.info>
>To: "glenn eriksson" <anykeystudio at hotmail.com>
>Subject: Re: SV: [A6] Does the Left/Right - Ribbon Function?
>Date: Fri, 14 Jan 2005 11:32:00 +0100
>
>
>Op 14-jan-05 om 11:13 heeft glenn eriksson het volgende geschreven:
>
>>Thanks Boele.
>>
>>Yes it seems strange. I tested all recalibrate and software reset 
>>yesterday. But it could bee that my Akai MPC has some midi filter setup? 
>>It was late so I didn’t have chance to look in to this.
>>I hope that nothing is wrong with it and that my midi setup is out for 
>>lunch :)
>
>Yes, that's more likely then that your A6 has a failure.
>
>Check if under "global" -> CC-map -> both RIBLCC AND RIBRCC have a CC 
>number assigned AND that your software sequencer will receive and transmit 
>those.
>
>Because if you use the ribbon in midi mode, the ribbon left and right will 
>send out different CC's and receive them back through your software 
>sequencer. If one of those is set to off under global -> cc map it won't 
>work on that particular side of the ribbon.
>
>So it's most likely that one of those is set to "off"
>
>Regards, Boele
>>
>>/Greeting Glenn
>>
>>
>>>From: Boele Gerkes <scd at synthmusic.info>
>>>To: "glenn eriksson" <anykeystudio at hotmail.com>
>>>Subject: Re: SV: [A6] Does the Left/Right - Ribbon Function?
>>>Date: Fri, 14 Jan 2005 09:50:48 +0100
>>>
>>>Don't know what's happening with your Andy, but I just did set up a patch 
>>>with the left Ribbon controlling filterfrequency and the right ribbon 
>>>controlling osc 1 frequency. That worked in all midi modes on mine.
>>>
>>>Regards, Boele
>>>
>>>
>>>Op 14-jan-05 om 9:26 heeft glenn eriksson het volgende geschreven:
>>>
>>>>Hi tested to set the Andy to LOCMIDI in the global section. This made 
>>>>the ribbon to function in L/R position. But it doesn’t work when it’s 
>>>>set to just MIDI. So for the L/R position to work I had to use LOCAL – 
>>>>LOCMIDI.
>>>>
>>>>This is a bit weird? Can anybody else confirm that the L/R position only 
>>>>work for LOCAL and LOCMIDI in the Global section-midi.
>>>>
>>>>Greeting Glenn.
>>>>
>>>>>From: David Evans <dfevans at bbcr.uwaterloo.ca>
>>>>>To: "glenn eriksson" <anykeystudio at hotmail.com>
>>>>>CC: a6 at code404.com
>>>>>Subject: Re: SV: [A6] Does the Left/Right - Ribbon Function?
>>>>>Date: Wed, 12 Jan 2005 21:28:38 -0500
>>>>>
>>>>>On Wed, Jan 12, 2005 at 11:53:34AM +0100, glenn eriksson wrote:
>>>>> > But I can’t get L/R-side of the ribbon to do any thing :(
>>>>>
>>>>>   So if you use one of the oscillator MODs to modulate frequency from
>>>>>Ribbon L (with an amount of, say, 20), nothing at all happens when you
>>>>>press the left half of the ribbon?
>>>>>
>>>>>--
>>>>>David Evans                                         
>>>>>dfevans at bbcr.uwaterloo.ca
>>>>>Research Associate, Ph.D. Candidate        
>>>>>http://bbcr.uwaterloo.ca/~dfevans/
>>>>>University of Waterloo         "Default is the value selected by the 
>>>>>composer
>>>>>Ontario, Canada           overridden by your command." - Roland TR-707 
>>>>>Manual
>>>>
>>>>_________________________________________________________________
>>>>Chatt: Träffa nya nätkompisar på Habbo Hotel 
>>>>http://habbohotel.msn.se/habbo/sv/channelizer
>>>>
>>>>_______________________________________________
>>>>A6 mailing list
>>>>A6 at code404.com
>>>>http://mailman.code404.com/mailman/listinfo/a6
>>>>
>>>
>>
>>_________________________________________________________________
>>Lättare att hitta drömresan med MSN Resor http://www.msn.se/resor/
>>
>

_________________________________________________________________
Hitta rätt på nätet med MSN Sök http://search.msn.se/




More information about the a6 mailing list