[A6] vco/ aux

[leo]

 about the vco pitch : i found that not only you need to set the osc 
pitch to fast ( under processor), but also switch off the background 
tuning.  then the  oscillator tuning/tracking seems to be good, at least 
i don't hear anymore  slowness problems when playing. my guess is it's 
 maybe a problem of processorpower and os software.

about the aux versus main output there has already been a lot of writing 
on code404.  i also notice a small difference in "directness" of the 
sound when switching between these outputs. i wonder if the " problem" 
might be due to the quality/effect  of the main volume pot  ? (rather 
then the effect of the bypassed effectunit or a piece of extra wire as 
suggested earlier)

on problem i find a bit annoying is that pressing the autotune doesn't 
seem to tune all 32 oscillators perfectly ( at least half of them keep 
drifting ( a very little in most cases), i guess a software problem. any 
form of manual tuning impemented would have solved this, now all left to 
do is disable ,temporary, the properly tuned osc. and then retune the 
others again by oscillatorfrequentietuning .( not autotune as this 
automatically retunes and enables all oscilators ,so you have to start 
over again). when all is tuned then enable the voices again.

nevertheless it keeps inspiring!