[A6] all jacked in

[Tom Moravansky]

> > 2) routed an individual voice out into Voice 15 filter in, then
> > route voice 15 out to Voice 16 filter in to give you 6 filters
> > in series?  (in practice, you'd probably use the 3 bandpass
> > filters plus the last Low pass filter).  With some mods on the
> > bandpass frequency and resonance, you should be able to get some
> > good vocal sounds and a good approximation of the Synton Syrinx.
> 
> Doing that would give you series filters, but for formant stuff like the
> Syrinx you need parallel BP filters, so that wouldn't work, but it should
> give you a nice unique cutoff slope ;-)
> 


You sure the Syrinx is parallel?  I seem to remember that cranking any
of those filters too much really cut down the Syrinx sound.  I know the
final LP filter sounded like it was in series after the 2 BP filters.
I'll have to power up the Syrinx tonight and check (or look at the
schematics...)


Since you can set the A6 voice 15, 16, etc BP filters to different
frequencies in Mix mode, you could have 3 bandpass filters in
series with different frequency centers.

Or take voices 1 and 2 with the same program in Mix mode and route
them to the 15 and 16 inputs.  Then you can get two different BP filters
in parallel and a common multi-mode filter in series with them (the voice
1,2 filter, which I guess you could set differently if you wanted).