[A6] filter levels

[Colin Chung]

----- Original Message -----
From: Richard <richard at chorlton.com>
To: <a6 at code404.com>
Sent: Friday, August 22, 2003 10:07 PM
Subject: [A6] filter levels


>
>  In Colin's comments on bass pragramming in the tips and tricks section I
> think he states that low VCF levels are desirable. I understand why low
VCO
> levels are good and I can hear the differences but why low VCF levels? Are
> these only relevent if you are using a lot of resonance or would they
affect
> softer sound too.
>
> I'd be interested to know what have you found to be ideal VCF levels and
> why?
>
> Also is the VCF level just the output volume, or does it actually affect
the
> amount of filtering going on?

Well if you listen carefully you will hear "distortion"
The more filter inputs the lower each input has to be to be more pure :)

I normally set them to 50, if tehre is only one filter inout in the mixer
Also rmeebr the 12DB filter does get louder with higher resonance
and vice veras for the 24db filter.

the VCF levels do effect the filter feedback.
This is post filtering