[A6] re: [AH] Aurora A6 Status Update

[Tony Rodrigues]

For the wood end panels, a nice natural cherry stain followed by 6-10 coats of satin-finish varnish, or a ton of hand-rubbed tung oil application coats.

Tony


 >>  ALL: Here's some of the latest pics.  Wood endcheeks are ready to be
 >>  finished, but I'm still undecided on color, so I'm taking suggestions. 
 >>  I'll
 >>  put together some mock-ups based on suggestions and post them and put it
 >>  up
 >>  for a vote I think.  here's the pics

 >>  http://www.stucki.com/krhen/downloads/aurora/fitted1.jpg
 >>  http://www.stucki.com/krhen/downloads/aurora/fitted2.jpg
 >>  http://www.stucki.com/krhen/downloads/aurora/fitted3.jpg
 >>  http://www.stucki.com/krhen/downloads/aurora/fitted4.jpg
 >>  http://www.stucki.com/krhen/downloads/aurora/fitted5.jpg
 >>  http://www.stucki.com/krhen/downloads/aurora/fitted6.jpg
 >>  http://www.stucki.com/krhen/downloads/aurora/fitted7.jpg
 >>  http://www.stucki.com/krhen/downloads/aurora/fitted8.jpg
 >>  http://www.stucki.com/krhen/downloads/aurora/fitted9.jpg

 >>  Getting closer to the display - a Blue-on-White is available off-the-shelf
 >>  drop-in replacement for the Andromeda model -  which should go nicely.
 >>  Mention of any custom colors and Hantronix starts talking about 'lots of
 >>  1000' so unless you each want to pitch in and buy four or ten, I may have
 >>  to
 >>  stick with the off-the-shelf colors :-)

 >>  http://www.stucki.com/krhen/downloads/aurora/BlueonWhiteLCD.jpg

 >>  I'm going to start working on the indiv out mixer section soon.

 >>  Thanks all
 >>  KRIS